The CAMUS Family of gas fired residential, commercial and industrial high efficiency, condensing, and non-condensing boilers & hydronic water heaters.

Avenger™

The Avenger™ is a two-pass counter flow fire tube commercial boiler for hydronic heating and hot water supply. It features thermal efficiencies of up to 98% and turndown ratios of up to 25:1

Standard Features


  • 160 PSI working pressure
  • Fully welded construction with stainless steel pressure vessel, tubes, tube sheets and combustion chamber
  • Modulating burner with up to 25:1 turn-down 
  • ASME “H” and “HLW” stamped heat exchanger
  • Operating pressure as low as 12 PSI
  • Natural or propane gas operation
  • Radial fired knitted fiber stainless steel burner
  • Variable frequency drive (VFD) modulation 
  • Modbus RTU standard, Protocol Translator available for other communication needs
  • Low NOx operation
  • Sealed combustion
  • Return water temperatures as low as 40°F
  • Inherent O2 trim
  • 1 to 1 air/gas ratio control for proper combustion across entire modulation range
  • Rear Connections; water, gas, vent and electric
  • Local/Remote switch for building management, remote modulation and set-point control
  • SOLA Controller featuring cascade controls- lead lag up to 8 boilers on a single system

Flow switch, pressure relief valve, low gas pressure switch and flame failure contacts are standard on every Avenger™

Downloads


Revit ( .rfa Format )


Control Panel Highlights


The Avenger™ is controlled by an integrated Honeywell SOLA controller. The 7” color touch screen provides remote operation through the 4-20mA or 0-10Vdc for set point or fire rate control. Paired with the ability to control multiple pump operation along with daisy chain set up for up to 8 boilers, this user friendly control also provides you with a USB output for screenshot capture, as well as password access for service personnel. Up to 8 SOLA devices may be monitored and controlled with one single display.

The Avenger™ Control Panel

Controls


The Avenger™ ControlsIn a world where we are becoming more connected, the Avenger™ is ready to enter this revolutionary phase in building automation. All Avenger™ models are equipped with standard Modbus RTU communication protocol to allow for BMS access to view boiler operation. The remote monitoring of a boiler plant allows for complete overview of various boiler-related temperatures, boiler status, pump activation, boiler error codes and more. This is not just limited to read-only parameters, as a BMS is permitted to write setpoint temperatures, enable/disable and remotely send and receive firing rate requests. To further evolve and adapt to the changing marketplace, the Avenger™ is available with BacnetIP, BacnetMSTP, MetasysN2 and LonWorks protocol support. All the features available in the Modbus RTU realm are carried into these protocol’s with the use a highly advanced yet user friendly Fieldserver Protonode. The Fieldserver Protonode is equipped with Ethernet or RS485 connectivity and is BTL (BACnet Testing Laboratory) Certified. This approval assures that we carry only the highest quality products with optimum performance and utmost ease of connectivity.