DynaMax® HS Series
The DynaMax® HS is a gas fired condensing boiler with up to 97% efficiency! Developed for residential and commercial applications, and available in floor or wall mount.
Performance Highlights
- Up to 97% efficiency
- Approved plastic venting up to 100 feet
- Up to 150 PSI Relief Valves
- Onboard digital operating control
- Fully modulating with 5:1 turndown
- Stainless steel heat exchanger
- Available Natural Gas or LP
- Thru wall exhaust vent (vertical or horizontal) with 3 air intake options:
- outside air sealed direct
- outside air
- indoor air
- Extremely low NOx
- Fail Safe high limit w/Manual reset
- Flow proving
- Direct spark ignition
- Zero clearance to combustibles
- Boiler Circulating pump
- Neutralizer Kit
- Many more standard features
- Several Optional features available such as Rack kits, and more...
Wall Mount - Model numbers
0200 ( 194 Mbtuh max. output )
0250 ( 243 Mbtuh max. output )
Floor Mount - Model numbers
0210 ( 194 Mbtuh max. output )
0260 ( 243 Mbtuh max. output )
0290 ( 291 Mbtuh max. output )
0390 ( 387 Mbtuh max. output )
0500 ( 485 Mbtuh max. output )
0600 ( 582 Mbtuh max. output )
0700 ( 679 Mbtuh max. output )
0800 ( 776 Mbtuh max. output )
Control Panel Highlights
- Multi-line LCD display
- Temp. readings, status boiler response
- Boiler faults shown in text
- User and Installer access
- Hydronic heating with outdoor rest and/or remote enable signal
- Instantaneous domestic hot water priority with plate heat exchanger
- Domestic hot water priority with direct/indirect storage tank utilizing a DHW sensor or aquastat
- Analog input signal (4-20mA or 0-10Vdc)
- Lead lag operation up to 8 boilers
- Standard Modbus communication
- available with BacnetMSTP, BacnetIP, LonWorks or MetasysN2 comm. protocol
- DHW pump contact
- Boiler modulates to shut down on flue gas high temperature detection
- Alarm contacts
- System sensor is included
- 15-item error lockout history
- 15-item alert history
- Fahrenheit/Celcius temperature readout
- UL353 approved outlet high limi
BMS Protocol Installation Guides
- DynaMaxHS BMS Protocol Installation Guide
93-0238 Rev. 4.4
(Modbus, Bacnet IP, Bacnet MSTP,LONWorks, Metasys N2) - DynaMax BMS Protocol Installation Guide
93-0237 Rev. 1.1
(Modbus, Bacnet IP, Bacnet MSTP, LONWorks, Metasys N2)
Engineering Submittal Sheets
Spec Sheet - DynaMAX® HS Combination
Hydronic Heating & Domestic Hot Water Boilers